Eaton 93PR Series - 7.2.4. Annual maintenance; 7.2.5. Battery maintenance; 7.3. Installation of Battery; WARNING

To Next Page

To Previous Page

7.2.3. Regular maintenance

Regular UPS inspection shall be carried out to conrm whether there is any overheating of parts,

wiring and interface. Pay special attention to the wire crimping terminals, and fasten them during

maintenance.

7.2.4. Annual maintenance

The annual preventive maintenance shall only be performed by Eaton customer service

engineers who are familiar with UPS system maintenance. For more information about

maintenance items, please contact your customer service representative.

7.2.5. Battery maintenance

For battery maintenance, please contact your customer service representative. Battery

replacement and maintenance shall be performed by Eaton customer service engineers only.

7.3. Installation of Battery

NOTE

There is no DC disconnecter available inside the UPS.

Please install the battery per the manufacturer’s instructions;

Recycle the used battery or UPS;

For proper disposal of battery, please contact your local recycling/reuse or hazardous waste recycling

center.

WARNING

• Do not throw the battery into a re, as it may explode. The battery shall be properly disposed

in accordance with the local laws and regulations.

• Do not disassemble or damage any battery. The released electrolyte may be toxic, and may

harm your skin and eyes

• The battery might cause electric shock, burning (high short-circuit current) or re. Please refer

to relevant precautions.

Other manuals for Eaton 93PR Series