Eaton 93PR Series - Figure 6-29: Control Password Modification Interface; Figure 6-30: Control Password Modification Interface

Eaton 93PR 15-80 kW UPS
Installation and Operation Manual
62
Copyright © 2022 Eaton Corporation plc. All rights reserved.
Figure 6-29: Control password modication interface
Figure 6-30: Control password modication interface
The Setting password modication interface is used to modify the password for accessing the
Settings interface. The setting password can be modied in the interface as shown in
Figure 6-31 .
Click the keyboard on the right side of the interface to enter the current password and the new
password, then click the “OK” button on the keyboard. If the password is veried, “New password
has been saved” will be prompted on the interface; if the entered password is wrong, “Wrong
password” will be prompted on the interface, which indicate you must re-enter a password.