Eaton 93PR Series - 6.2.5. Meters

Eaton 93PR 15-80 kW UPS
Installation and Operation Manual
50
Copyright © 2022 Eaton Corporation plc. All rights reserved.
Figure 6-3: Menu interface
Table 6-2: Options displayed on the menu
Menu Option description
Meters Display the measurements of the system or critical load.
Control Access various system control screens.
Statistics
Access and view the specic operating values of the system. Such operations shall
be performed by Eaton service engineers only.
Log Access the system logs, including alerts, notices and commands.
Info Display the UPS and HMI information.
Settings Access various screen control variables for system operation.
6.2.5. Meters
Click Meters on the menu to enter the Meters interface. Shown in Table 6-3 is the menu structure
of Meters. The Meters interfaces are shown from Figure 6-4 to Figure 6-7
Table 6-3: Menu of Meters functions
Menu Option description
Input
The “Input” screen displays the input voltage (per phase), input current (per phase),
input power (per phase), and total frequency as well as total kVA, total kW, and
power factor measurements of the AC mains.
Output
The “Output” screen displays the output voltage (per phase), output current (per
phase), output power (per phase), and total frequency, as well as total kVA, total kW,
and power factor measurements of the AC mains.
Bypass
The “Bypass” screen displays the bypass input voltage (phase voltage), input current
(per phase), input power (per phase), and total frequency as well as total kVA, total
kW, and power factor measurements of the bypass.
Battery
The “Battery” screen displays the battery voltage, cell voltage, battery current, and
more.