Eaton 93PR Series - Intelligent Power Manager (IPM) Software; Signal Input Monitoring

45
Copyright © 2022 Eaton Corporation plc. All rights reserved.
5.2. Intelligent Power Manager (IPM) Software
The Intelligent Power Manager (IPM) software is a specialized software for Eaton’s power management
system. IPM can perform remote monitoring and manage the UPS. IPM allows the user to check the
power equipment within an international enterprise through a PC. The software supports monitoring of
single and multiple (if web-based) Eaton UPS systems or other brands, intelligent power distribution units
(ePDUs), other power and environment devices, and supports virtual environments.
You can download the software from Eaton’s website.
5.3. Signal input Monitoring
You can use this function to connect input signals such as smoke detector or overheat alarm to the UPS.
The user interface terminals for external connections are inside the UPS. Twisted-pair cables shall be
used for connection.
The name of the signal input can be congured to display the alarms of functional names on the screen.
CAUTION
Attention: Do not operate the contact at any voltage above 30VAC (RMS) or 30VDC, or at
any current above 5A.