Eaton 93PR Series - 6.2.6. System Control Instructions

Eaton 93PR 15-80 kW UPS
Installation and Operation Manual
52
Copyright © 2022 Eaton Corporation plc. All rights reserved.
Figure 6-7: Battery interface
6.2.6. System Control Instructions
Click the Control button on the menu interface, enter the initial control password “1111” and click
“OK”. When the password is veried, click “Next” to enter the Control interface, as shown in
Figure 6-8 . The structure of Control menu is shown in Figure 6-4 .
Table 6-4: Structure of Control menu
Menu Option description
System
On the “System” screen, you can perform system-to-bypass switching, system
startup, system shutdown, and ESS enabling operations. In the upper part of the
interface, you can view the UPS status and battery status.
UPS
On the “UPS” screen, you can perform battery test, turn on the battery charger, turn
off the battery charger, turn on a single UPS, or turn off a single UPS. In the upper
part of the interface, you can view the UPS status and battery status.
UPM
On “UPM” screen, you can view UPM status, UPS status, and battery status; or shut
down the UPM.
Figure 6-8: Password verication interface