Eaton 93PR Series - 1.2. User Precautions

Eaton 93PR 15-80 kW UPS
Installation and Operation Manual
2
Copyright © 2022 Eaton Corporation plc. All rights reserved.
1.1. Certication
The product has received EMC Directive 2004/108/EC certication:
UPS EN 62040-1 (Safety) and EN 62040-2(EMC) standard declaration can be obtained via the website
(http://powerquality.eaton.com) or the local ofce of Eaton and licensed partners.
1.2. User Precautions
The only user operations permitted are:
• UPS startup and shutdown, excluding commissioning startup.
• Use of LCD control panel.
Users must follow the preventive measures, and can carry out the above operations only. Any violation of
the instructions may result in dangers or accidental damage load.
CAUTION
• Users are not allowed to remove any screws, other than those on the connecting plates and
MBS locking panel. Prevent electrical hazards.
• If the product is used in a C2 environment, additional measures shall be taken to further
suppress electromagnetic interference. This product is intended for commercial and industrial
application in a C3 environment.