Eaton VC-W MR2 - User Manual

Contents
Description Page
Notices and warnings ......................4
Introduction ..............................4
Eaton contact information .................4
Pan configurations .........................5
Permissive interlocks .......................5
Operational interlock features ..............5
Lockout-tagout ..........................7
Diagnostics/troubleshooting .................8
E1: Motor overcurrent ....................8
E2: Open motor circuit ....................8
E3: Motor timed out .....................9
E4: MV device position “unknown” ..........9
E5: Open permissive .....................9
Instructions for installation, operation,
and maintenance of medium voltage
VC-W MR2 (integral racking)
Description Page
E6: Communication error ..................9
E7: No MV device .......................9
E8: Firmware compatibility error ............9
E9: No test (MR2 open/close only) ..........9
Controller diagnostic display .................9
Setting the gear type .......................9
Setting the Modbus address ................10
Manual racking ..........................10
Control options ..........................11
Option 1 ..............................11
Option 2 ..............................12
Option 3 ..............................12
Callout descriptions .......................12
Sequence of operations ...................13
Instructional Booklet IB022010EN
Effective July 2019 Revision #4

Eaton VC-W MR2 Specifications