Eaton XN300 - 27.1 Status LEDs

27 Analog output module XN-322-4AO-UI
27.1 Status LEDs
201 XN300 slice modules 02/24 MN050002EN Eaton.com
27.1 Status LEDs
a Module status LED
b User LED
c Analog voltage output 1 status LED
d Analog current output 1 status LED
e Analog voltage output 2 status LED
f Analog current output 2 status LED
g Analog voltage output 3 status LED
h Analog current output 3 status LED
i Analog voltage output 4 status LED
j Analog current output 4 status LED
k Supply voltage OK status LED
Figure 108: Display
Module status
Green ON System OK
OFF No power
FLASHES (5 Hz) No communications
Status User
yellow ON The user can set the LED signals as necessary.
(For example, the visualization interface can be used to set
the module's LED to flash so that it is easier to find the
module inside the control panel.)
OFF
FLASHES (2 Hz)
FLASHES (4 Hz)
Analog Output
Status 1…4
Voltage
yellow ON Voltage present at analog output
OFF No voltage at analog output
Flashes There is a voltage fault
Analog Output
Status 1…4
Current
yellow ON Current present at analog output
OFF No current at analog output
Flashes There is a current fault
Status
Specifications
for connection to
supply voltage
Green ON Supply voltage OK
OFF No supply voltage for analog outputs
X1
4AO
UI
S
U
X2
X3
X4
X5
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
1U
1I
2U
2I
3U
3I
4U
4I
24
24
0V
0V
①
②