1 XN300 slice modules
1.4 Catalog number selection XN300
XN300 slice modules 02/24 MN050002EN Eaton.com 18
1.4 Catalog number selection XN300
XN - 3 2 2 - x xx - x x x
Auxiliary function
20 = 2.0 A
8DIO = 8 Digital I/O
B35 = Brush 3.5A
I1 = Range 0…20 mA
I = Range 0/4…20 mA
RCO = Relay Normally Closed
RNO = Relay Normally Open
RS = Recommended Standard
P = Power
P05 = Positive 0.5
P05S = Positive 0.5 > separated
P17 Positive 1.7 A=
PCNT = Positive Counter
PD = Positive Delay
PF = Positive Fast
PFS = Positive Fast Separated
PTKT = PT and KT sensors
PTNI = PT and NI sensors
TEKT = Thermo-Element with KTY cold junction
compensation
UI = Range -10.8 to +10.8 V or 0 to 21.6 mA.
U2 = Range -10…+10VDC
U2PT = Range -10…+10VDC with PT
WM = Weigh Module
UMS = interface converter (Switch)
Type of input/output
AI = analog inputs
AO = analog outputs
CNT = counter
DCD = Current regulator
DI = digital inputs
DO = digital Outputs
DIOAI = multi I/O and analog input
DMS = weigh module
ETH = Ethernet
MIO = Multiple digital inputs and outputs
SI = serial interface
PWM = pulse width modulation
Number of inputs/outputs (+ expansion)
Product code 322
Product family XN
To Next Page
Loading...
