XN300 slice modules 02/24 MN050002EN www.eaton.com
All brand and product names are trademarks or registered trademarks of their
respective owners..
Service
For service and support, please contact your local sales organisation.
Eaton.com/contacts
Eaton.com/aftersales
Original operating manual
The German-language edition of this document is the original operating manual.
Translation of the original operating manual
All editions of this document other than those in German language are translations of
the original operating manual.
1st edition 2014, publication date 12/14
2nd edition 2016, publication date 02/16
3rd edition 2016, publication date 06/16
4th edition 2023, publication date 04/23
5th edition 2024, publication date 02/24
See revision protocol in the „About this manual“ chapter
© 2024 by Eaton Industries GmbH, 53105 Bonn
Authors: Thomas Hettwer
All rights, including those of translation, reserved.
No part of this manual may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying,
micro-filming, recording or otherwise, without the prior written permission of Eaton
Industries GmbH, Bonn.
Subject to alteration.
To Next Page
Loading...
