Eaton XN300 - 36.1 Status LEDs

36 Interface module XN-322-2SSI
36.1 Status LEDs
297 XN300 slice modules 02/24 MN050002EN Eaton.com
36.1 Status LEDs
Figure 163: XN-322-2SSI LEDs
a Module status LED
b User status LED
c SSI encoder LED
Module status
Green ON System OK
OFF No power
FLASHES (5 Hz) No communications
Status User yellow ON The user can set the LED signals as necessary.
(For example, the visualization interface can be used to set
the module's LED to flash so that it is easier to find the
module inside the control panel.)
OFF
FLASH
(200 ms ON,
1000 ms OFF)
FLASH
(1000 ms ON,
200 ms OFF)
SSI encoder
status
Green ON There is communication with the SSI encoder
OFF No communication with the SSI encoder
X1
C+
C-
D+
D-
S
U
X2
C+
C-
D+
D-
2SS1
①
③
②