Eaton XN300 - 37.1 Status LEDs

37 Pulse width module XN-322-2PWM
37.1 Status LEDs
XN300 slice modules 02/24 MN050002EN Eaton.com 306
37.1 Status LEDs
Figure 169: LED signals and pin assignment
a Module status LED
b User LED
c P1 and P2 POW supply voltage LED
Module Status Green ON System OK
OFF No power
FLASHES (5 Hz) No communications
User yellow ON The user can set the LED signals as necessary.
(For example, the visualization interface can be used to set
the module's LED to flash so that it is easier to find the
module inside the control panel.)
OFF
FLASHES (2 Hz)
FLASHES (4 Hz)
POW P1/P2
Green ON Supply voltage for PWM outputs present
OFF Supply voltage <18 V for the PWM outputs
X1
2PWM
S
U
X2
24
0V
P1
P2
nc
nc
0V
0V
①
②
③