Eaton XN300 - Page 343

39 Appendix
39.5 Further reading and links
339 XN300 slice modules 02/24 MN050002EN Eaton.com
39.5 Further reading and links
For more information on additional devices and modules, please visit the
following links.
Product information
For up-to-date information, please consult the product page on the Internet
eaton.com/xn300
Download Center — Documentation
You can find the documents on the Download Center - Documentation page
by entering the document name.
eaton.com/documentation
Download Center — Software
The XSOFT-CODESYS-2 and XSOFT-CODESYS-3 software described in this
manual, as well as updates for the XN-312-… operating system, EDS files,
application examples, and the XN300-Assist engineering tool, are available on
the Internet from the Eaton Download Center — Software page:
eaton.com/software
File type Title Designation
Mounting instruction XN-312-GW-CAN IL050017ZU
Mounting instruction XC-303-… IL050018ZU
Mounting instruction XControl, XC-104-…, XC-204-… IL050031ZU
Manual XN-312-GW-CAN MN050003
Manual XN-312-GW-EC MN050010
Manual XN300 slice modules MN050002
Manual Modular PLCs XControl: XC-104-…,
XC-204-…, XC-303-…
MN050005
Category Title Designation
Software XSOFT-CODESYS-2 XSOFT-CODESYS Vx.x.x SPx
Software XSOFT-CODESYS-3
Firmware Updates XN300 XN-312-GW-CAN FW Vx.xx
Firmware Updates XC300 Included in:
XSOFT-CODESYS Vx.x.x SPx
Tools XN300-Assist XN300-Assist Vx.xx
Application examples XC300 XC300 Application examples
CODESYS V3
for slice modules
XN-322-20DI-PCNT
XN-322-1CNT-8DIO,
XN-322-1DCD-B35
XN-322-2SSI
XN-322-2DMS-WM