Eaton XN300 - 13.4 Technical data relay outputs

13 Relay output module XN-322-4DO-RNO
13.4 Technical data relay outputs
XN300 slice modules 02/24 MN050002EN Eaton.com 82
13.4 Technical data relay outputs
13.5 Connection terminals
Table 4 XN-322-4DO-RNO connection specifications
Number of relay outputs
4
Function Normally open
Rated operating voltage U
e
24 V DC 230 V AC
maximum rated operating voltage 30 V DC 250 V AC
Continuous current per channel I
c
6 A DC 6 A AC
Simultaneity of all outputs 100 %
Continuous current per connector contact max. 10 A DC max. 10 A AC
Current-carrying capacity of common contact
link I
B
max. 10 A DC max. 10 A AC
On-delay/off-delay
 10 ms/ 10 ms
Switching Frequency
Mechanical switching operations 10 x 10
6
Resistive load / lamp load 2Hz
Inductive 0.5 Hz
Switching frequency as per IEC 61810
(8A, 250VAC, cos=1, 85°C)
100x10
3
Making capacity
AC-15, 250 V AC, 3 A (600 S/h) 300000 switching operations
DC-13, L/R  150ms, 24 V DC,
1 A (500 S/h)
200000 switching operations
Breaking capacity
AC-15, 250 V AC, 3 A (600 S/h) 300000 switching operations
DC-13, L/R  150ms, 24 V DC,
1 A (500 S/h)
200000 switching operations
Filament bulb load
1000 W at 230/240 V AC 25000 switching operations
500 W at 115/120 V AC 25000 switching operations
Fluorescent lamp load of 10 x 58 W with 230/
240 VAC (with ballast, without compensa-
tion, with compensation)
25000 switching operations
Insulation test voltage
Contact-to-contact 1500 V
Coil-to-contact 1500 V
Material AgSnO2