Eaton XN300 - 14.1 Status LEDs

14 Relay output module XN-322-5DO-RCO
14.1 Status LEDs
XN300 slice modules 02/24 MN050002EN Eaton.com 86
14.1 Status LEDs
Figure 52: LED layout
a Module status LED
b User LED
c Output 1 status LED
d Output 2 status LED
e Output 3 status LED
f Output 4 status LED
g Output 5 status LED
Module status
Green ON System OK
OFF No power
FLASHES (5 Hz) No communications
User
yellow ON The user can set the LED signals as necessary.
(For example, the visualization interface can be used to set
the module's LED to flash so that it is easier to find the
module inside the control panel.)
OFF
FLASHES (2 Hz)
FLASHES (4 Hz)
CO output status yellow ON Relay active; Ox contact close; Cx contact open
OFF Relay inactive; Ox contact open; Cx contact close
X1
5DO
RCO
S
U
X2
X3
X4
X5
③
④
⑤
⑥
⑦
R1
R1
O1
C1
R2
R2
O2
C2
R3
R3
O3
C3
R4
R4
O4
C4
R5
R5
O5
C5
①
②