EBA 551-06 - Cutting Activation and Safety Controls

- 16 -
EBA 551-06 • EBA 551-06 LT
B
A
A
•
Operation
•
Cutting activation
Do not reach into the cutting area when the
blade is in motion.
A cut can only be activated when the
specified size is approached. The LED "S" on
the display must be deleted.
• Release the photo-electric beam guard (A).
• Press both buttons of the safety two-
handed control system (B) simultaneously
and keep them pressed until the paper is
completely cut.
Cutting stop or interruption:
Release both buttons of the two-hand control
(A).