8
Selecting different Modes
Press the MODE button (1) and
MAX will illuminate on the display
The unit is now running at MAX capacity on a fan speed
setting of 2 (high). The unit will now run continuously.
Press the MODE button (1) again
and SMART will illuminate on the
display
This unit is operating in SMART mode and the fan speed
will decrease to 1 (slow/normal).
Press the FAN button (5) to cycle
through the fan speeds
The FAN symbol (12) will illuminate showing either a
number 1 (slow/normal) or number 2 (high) depending on
the speed selected.
Fan speed can only be changed in SMART, MAX or AIR
PURIFYING Mode.
Using the Laundry Drying Function
Press the LAUNDRY button (4)
and the laundry symbol (9) will
illuminate
The unit is now set to operate at the highest fan speed at
maximum capacity.
The unit will run for the highlighted time (10) before
reverting to SMART Mode.
Press the TIMER button (2) to
change the length of time
LAUNDRY mode will operate
The order the times will cycle through is as follows:
2hrs – 4hrs – 8hrs – 2hrs
Using the Air Purifying Mode
Press the AIR PURIFYING button
(6) and symbol (11) will illuminate
The unit is now in Air Purifying mode. The dehumidifier will
now stop extracting moisture from the air and simply pull
air through the filter to remove any impurities before re-
circulating it.
Set unit to Quiet (slow) Air
Purifying mode
Press the fan button (5) until a number 1 is illuminated next
to the fan symbol (12).
Set unit to high speed Air Purifying
mode
Press the fan button (5) until a number 2 is illuminated next
to the fan symbol (12).
Press the TIMER button (2) to
cycle through the options
The order the times will cycle through is as follows:
2hrs – 4hrs – 8hrs – 2hrs
The Timer function is available in MAX and LAUNDRY
DRYING modes.
Switching unit to Standby
Press the STANDBY button (3)
The Status light (8) will now be illuminated orange; the unit
is now in STANDBY mode.
To Next Page
Loading...
