6
1 | Remove 2x access cover screws to reveal terminal blocks mounted on PCB
Note
There is no mains cable supplied with the
unit as the distance the unit is installed
from the mains supply will vary in each
application. Appropriate mains wiring must
be sourced by the installer
Recommended Cable
3 Core - 3 X 0.75mm
2
Unit Installation
2.0
2.5 Electrical Installation
POWER OFF THE POWER SUPPLY PRIOR TO ANY OPERATIONS
WITH THE UNIT. THE UNIT MUST BE CONNECTED TO POWER
SUPPLY BY A QUALIFIED ELECTRICIAN. THE RATED ELECTRICAL
PARAMETERS OF THE UNIT ARE GIVEN ON THE
MANUFACTURER’S LABEL
ANY TAMPERING WITH THE INTERNAL CONNECTIONS IS
PROHIBITED AND WILL VOID THE WARRANTY
THIS UNIT MUST BE CORRECTLY EARTHED
To Next Page
Loading...