EasyManua.ls Logo

EBENCH KH 2288 - Display and Timer Functions; Kitchen Timer; Programming the Kitchen Timer

EBENCH KH 2288
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 8 -
Switching the dimmer on and off
The dimmer function darkens the
display, when no actions are being taken.
1 In automatic mode, press the Mode
button
w
five times. "DIM OFF"
appears on the display.
2 Press the button Up
e
, to activate
the dimmer function. "DIM ON"
appears on the display.
3 Press the button Down
i
, to deactivate
the dimmer function. "DIM OFF"
appears on the display.
Kitchen timer
1 Press the button Timer
t
.
2 Press the buttons Up
e
and Down
i
to set the desired time (a time bet-
ween 1 minute and 23:59 h is possible).
3 Press the button Timer
t
again to
start the kitchen timer. A clock symbol
running in anti-clockwise direction
appears on the display.
30 seconds before the time runs out, an
acoustic signal is issued every 5 seconds,
which sounds at shorter intervals the
closer the function approaches the set
time. When the time has expired a
permanent signal is issued.
Press the button Timer
t
, to terminate
the acoustic signal.
Interrupting the kitchen timer.
You can interrupt the kitchen timer by
briefly pressing the button Timer
t
.
The time is stopped. The clock symbol
no longer appears. Press the timer but-
ton
t
again. The time continues to run.
Terminating the kitchen timer
To terminate the kitchen timer, keep the
button Timer
t
pressed. The kitchen
radio displays the time.
Programming the kitchen timer
By means of the memory buttons
MEM.1/6
k
to MEM.5/10
f
you can
memorise kitchen timer times.
1 Press the button Timer
t
.
2 Using the button Up
e
and
Down
i
, set the desired time.
3 Press the button MEM.SET
d
.
"T" flashes on the display.
4 Press the button for the desired
memory location. There are 5 memory
locations at your disposal. MEM. 1/6
k
to MEM. 5/10
f
. The number of
the memory location selected by you
appears on the display.
5 Press the button MEM. SET
d
again.
The time is now programmed.
6 To call up the programmed kitchen
timer times, press the button Timer
t
and the button of the corresponding
memory location (MEM.1/6
k
to
MEM.5/10
f
) in automatic mode.
7 Press the button Timer
t
again to
start the kitchen timer. A clock symbol
running in anti-clockwise direction
appears on the display.
8 To return to automatic mode, press
and hold the button Timer
t
for two
seconds.
KH2288
KH2288_E2575_0107_V2_UK 09.03.2007 16:33 Uhr Seite 8