- 5 -
• Make sure that the kitchen radio has
a minimum clearance from walls and
objects at the sides and bottom of
4 inch. Do not cover the kitchen radio
with objects or fabrics (e.g. curtains).
There is a danger of fire!
• Regularly check the condition of the
batteries. Leaking batteries can cause
damage to the appliance.
• Always change all batteries at the sa-
me time and always use batteries of
the same type.
• If you do not intend to use the appli-
ance for an extended period, remove
the batteries.
• In the event of the batteries leaking
acids, wear protective gloves.
• Clean the battery compartment with
a dry cloth.
This appliance is equipped with non-
slip rubber feet. As surfaces can
comprise of various materials and be
treated with various cleaning
agents, it cannot be completely ex-
cluded that some of these materials
contain components that could at-
tack and soften the rubber feet. If
necessary place an anti-slip mat un-
der the feet of the appliance.
Description of the appliance
q
Mounting plate
w
Mode button
e
Button Up
r
Button Al1/VOL+
t
Button Timer/Alarm/Mode/Setting
y
Dipole antenna
u
Button Al2/VOL-
i
Button Down
o
Button Mem.Review/AMS
a
Display
s
Battery compartment
d
Button MEM.SET
f
Button MEM. 5/10
g
Button MEM. 4/9
h
Button POWER
j
Mains cable
k
Button MEM. 1/6
l
Button MEM. 2/7
;
Button MEM. 3/8
Hanging up the kitchen radio
To hang up the kitchen radio with the
enclosed mounting plate
q
:
1 Find a suitable location for the
kitchen radio.
2 Press the two retaining levers on the
back of the appliance down. Push the
mounting plate
q
back and remove it.
3 Hold the mounting plate
q
to the
installation location. Allow 3 cm space
at the front edges. This way the
kitchen radio will later fit flush.
4 Mark the four points for the drillholes
with a pencil.
5 Mark the drillhole with a mandril.
6 Screw down the mounting plate
q
.
KH2288
To Next Page
Loading...