EasyManua.ls Logo

EBENCH KH 2288 - Date and Special Features; Setting the Date

EBENCH KH 2288
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 7 -
Setting the date
1 In automatic mode, press the mode
button
w
twice. The display shows
"01
D01M
2007Y", the date display
flashes.
2 Press the button Up
e
or Down
i
to set the date at daily intervals.
Pressing and holding the buttons
changes the date at 10-day
intervals.
If no button is pressed within 10 seconds,
the kitchen radio switches back to auto-
matic mode.
Setting the SDA
By means of the SDA (Special Day Alert)
mode it is possible to store certain
days.You can activate up to 5 dates.
The kitchen radio then reminds you at
8 a.m.of the set day.
1 In automatic mode, press the button
Mode
w
. On the display, "SDA 1" and
"31
D12M2006Y" flash.
2 Press the button Up
e
or Down
i
to set the date at daily intervals.
Pressing and holding the buttons
changes the date at intervals of
10 days.
3 Press the Timer button
t
, to deacti-
vate the year.If you deactivate the
year, the SDA alarm will respond on
the set date every year.
4 Press buttons MEM 2/7
l
to MEM 5/10
f
, to program further SDA alarms.
If no button is presssed within 10 seconds,
the kitchen radio automatically returns
to automatic mode.
When the set date corresponds with the
SDA alarm..
an acoustic signal is issued at 8 a.m.
for ten minutes,
"SDA" flashes on the display,
the acoustic signal is repeated every
hour until 11 p.m.
If you wish to stop the SDA alarm, press
any button.
Automatic Update (RDS)
The RDS signal transfers additional infor-
mation such as name of the station, time
or song title to the radio. With the assi-
stance of the automatic update func-
tion, the time of your kitchen radio is
automatically updated upon reception
of the RDS signal.
1 In automatic mode, press the mode
button
w
four times. "UPDATE"
appears on the display.
2 Press the button Up
e
, to activate
the automatic update function. A
clock symbol flashes on the display
above "Update". The time is now
automatically updated upon each RDS
signal.
3 Press the button Down
i
, to deacti-
vate the automatic update function.
The clock symbol no longer appears.
KH2288
KH2288_E2575_0107_V2_UK 09.03.2007 16:33 Uhr Seite 7