Eberg ELIO E35T1 - Appliance Operating Mode Configurations; Fan, Dry, and Smart Mode Setup Instructions

ELIO EN
44
www.eberg.eu
FAN mode
• When using the appliance in this mode, the air hose does not need to be attached.
• Press the button anumber of times until the “Fan” symbol appears.
• Select the required fan speed by pressing the button.
• Two speeds are available: High / Low.
The screen display “ ” as high speed, “ ” as low speed.
Top panel display Front display
DRY mode
Ideal to reduce room humidity (spring and autumn, damp rooms rainy periods, etc).
In dry mode, the appliance should be prepared in the same way as for cool mode, with the air exhaust
hose attached to enable the moisture to be discharged outside.
To set this mode correctly:
• Press the button anumber of times until the Dry symbol appears. The screen display “ ”.
• In this mode, fan speed is selected automatically by the appliance and can not be set manually.
SMART mode
The appliance chooses automatically whether to operate in cool or fan mode.
To set this mode correctly:
• Press the button anumber of times until the screen show like below:
• Select the required fan speed by pressing the button.
• Three speeds are available: High / Low / Auto.
If the appliance is cooling only model, the unit operates in Fan mode when the room temperature is below
23°C (73°F), and Cool mode when the room temperature is above 23°C (73°F).