Eberg ELIO E35T1 - Sleep Function Operation and Temperature Unit Switching; Sleep Function Details and Celsius;Fahrenheit Conversion

ELIO EN
50
www.eberg.eu
The SLEEP function maintains the room at optimum temperature without excessive uctuations in either
temperature or humidity with silent operation. Fan speed is always at Low, while room temperature and
humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1°C (1°F) per hour in a2 hour period. This
new temperature will be maintained for the next 6 hours. Then the appliance turn it o.
The SLEEP function can be canceled at any time during operation by pressing the “Sleep”, “Mode” or “fan
speed” button.
In DRY mode, SLEEP function is still available.
Switch the unit of temperature
When the appliance is running, press the button, then you can change the unit of temperature.
For example:
Before change, in cool mode, the screen display like g1.
After change, in cool mode, the screen display like g2.
SETTING THE TIMER
This timer can be used to delay the appliance start-up or shutdown, this avoids wasting
electricity by optimizing operating periods.
a) Programming start up
Turn on the appliance, choose the mode you want, for example cool, 24°C, high fan speed. And turn o
the appliance by the remote control.
• Press the button twice, the screen will display hours, the symbol and symbol are
ashing .
• Press the or button until the corresponding time is displayed.
• Press the button again, the timer will be active, the symbol and are displayed
on screen.
• Press the button again or the button, the timer will be canceled, and the symbol
will disappear from screen.