Eberspächer EasyStart Select Installation Instructions

2 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
CONTENTS
CHAPTER CHAPTER TITLE PAGE
CHAPTER CONTENTS
1 INTRODUCTION
Please read first 4
Safety instructions 4
Intended use 4
General information 4
– VENTILATION operating mode 4
– Temperature sensor 4
– Installation instructions for special functions 4
Technical data 5
Scope of supply 5
Sketch of EasyStart Select scope of supply 6
2 INSTALLATION
Installing the EasyStart Select 7
Installing the tab connector of the EasyStart Select lead harness 7
EasyStart Select installation sketch 8
Connector housing (Chamber assignment seen from the cable inlet side) 8
-XS4 / -XB4 connector assignment table 9
Installation sketch key 9
Connection of bush housing to the control unit lead harness 9

Eberspächer EasyStart Select Specifications

General

Brand	Eberspächer
Model	EasyStart Select
Category	Control Unit
Language	English