Operating instructions
M3G084-GF08-81
Translation of the original operating instructions
4.2.4 Locked-rotor protection
Due to the locked-rotor protection, the starting current (LRA) is
equal to or less than the nominal current (FLA).
4.3 Connecting the cables
The device has external leads.
; First connect the "PE" (protective earth).
● Connect the cables according to your application. When doing so,
observe Chapter 4.5 Connection diagram.
4.4 Factory settings
Factory settings made for the device by ebm-papst.
Mode PWM control
Group address 01
Fan/device address 01
Max. PWM / % 100
Min. PWM / % 0
Save set value to
EEPROM
No
Set value requirement Analog
Direction of action Positive (heating)
Item no. 50840-5-9970 · ENU · Change 94899 · Approved 2018-03-06 · Page 7 / 11
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone +49 (0) 7938 81-0 · Fax +49 (0) 7938 81-110 · info1@de.ebmpapst.com · www.ebmpapst.com
To Next Page
Loading...
