Chengdu Ebyte Electronic Technology Co., Ltd. NE2-D11/NE2-D12 User Manual
Copyright © 2012-2024, Chengdu Ebyte Electronic Technology Co., Ltd.
Configure the corresponding subscription and publishing address, and use the platform to debug
and send data online for communication test:
4.3 Serial port parameters
Serial port parameters include baud rate, data bit, check bit and stop bit.
Baud rate: Serial communication rate, which can be configured at 600, 1200, 240, 480, 960, 144,
192, 384, 576, 115, 200, 230, 400, 460800 bps.
Data bit: The length of data bits, ranging from 5, 6, 7 to 8.
Check bit: Check bit of data communication, support None, Odd, Even three kinds of check
mode.
Stop bit: can be set to range 1, 1.5 and 2.
By setting the serial port parameters, keeping the serial port parameters consistent with the
serial port connection equipment can ensure the normal operation of communication.
To Next Page
Loading...
Need help?
General
