ECA CONFEO PREMIX P Series User Manual


POSITION
DISTANCE(cm)
POSITION
DISTANCE (cm)
- Bel a in

G- Next t ercal r hrintal
pipe

B - Bel an air ent

- Bel the istance rille frm
the utsie f the uilin
3
- Bel rain channel
3
I- Distance frm the inner crner
f the uilin
1
D- ner the alcny
3
L- rm the run r frm the
r
1
E- Next t a in
4
- ercal istance f t ue
utlets
15
- Next t an air rill

N- rintal istance f t
ue utlets
1
Table 4
8- INSTALLATION
8.1- Selection of Installation Location of Device
The boiler must be installed in accordance with gas safety regulations and relevant standards. Addition-
ally, the clearance around the boiler should be as shown in fig 8. In order to make service, maintenance
and usage easier.
Figure 8: It shows the minimum distances required from the top and sides of the device (Dimensions
given in cm).
The installation must comply with the following minimum distances so that servicing and maintenance
of the boiler can be performed correctly. The position of the boiler must be checked against technical
requirements.
Figure 8

ECA CONFEO PREMIX P Series Specifications

General

Brand	ECA
Model	CONFEO PREMIX P Series
Category	Boiler
Language	English