ECA CONFEO PREMIX P Series User Manual

32
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Switch  and n the biler.
2- If the errr is sll present (r persists) aer
switch /n, nfy authrized service f E.C.A.
1- Switch  and n the biler.
2- If the errr is sll present (r persists) aer
switch /n, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Press reset bun.
2- If the errr is sll present (r persists) aer
reset, nfy authrized service f E.C.A.
1- Switch  and n the biler.
2- If the errr is sll present (r persists) aer
switch /n, nfy authrized service f E.C.A.
1- Switch  and n the biler.
2- If the errr is sll present (r persists) aer
switch /n, nfy authrized service f E.C.A.
E99 Hardware Faults 4 Specic fault in hardware
E83
High Temperature Errr fr
Flue Gas ( twice F07 errr in
last mnth)
Main Exchanger prblem
E
98 Hardware Faults 3 Specic fault in hardware
E80
Temperature dierence errr
between return water
temperature and supply water
temperature sensr
Temperature detected by
temperature sensr fr return
water is higher than temperature
detected by temperature sensr
fr supply sensr
E82
Flame failure (mre than 12
ame lss in ne hur)
Flame detecn prblem
E64 Hardware Faults 1 Specic fault in hardware
E65 Hardware Faults 2 Specic fault in hardware
E38
Lw water pressure errr 1
week aer last water lling
Water leakage in plumbing r biler
E44 Valve prvides n feedback The gas valve may be failed.
E33
Errr n Temperature Sensr
fr Return Sensr
The return water temperature
sensr
is in shrt r pen circuit
state.
E35
Errr n Temperature Sensr
fr Supply Water Temperature
The utging water temperature
sensr is in shrt r pen circuit
state.
E17
Errr n Temperature Sensr
fr Return Sensr
N temperature is detected by
temperature sensr fr return
sensr.
E18 Temperature Sensr Errr
The temperature change n the
temperature sensr is t high (>
30 C)
E16
Errr n Temperature
Sensr
fr Supply Water
N temperature is detected by
temperature sensr fr supply
water.

ECA CONFEO PREMIX P Series Specifications

General

Brand	ECA
Model	CONFEO PREMIX P Series
Category	Boiler
Language	English