Ecco EC7008-WM2 - Page 4

Page 4 of 9
Display Mode
• Select display mode.
• is auto-scan, automatically switch channel in circle from channel 1
through to .
• Press ‘+’or ‘- ’ button on monitor or VOL +/- on remote control to switch option.
Press on monitor or ‘OK’ on remote control to select the channel and exit
the menu.
Pairing
• Pairing Camera: select the channel you want to pair.
• Press ‘+’ or ‘- ‘button on monitor or VOL +/- on remote control to switch option.
• Press button on monitor or ‘OK’ on remote control to start pairing.
When pairing is in process, there will be pairing icon on top of the
correspondent channel.
Pairing icon will be replaced with a check mark when pairing is successful. If no
camera pairs successfully in 20 seconds, the pairing icon will disappear and the
pairing process will stop.
Delete Camera: remove the camera that is already paired to the selected channel.
Record Control
• Select to start and stop record.
• Press button on monitor to start record or stop record.
When camera is not connected, press record, a grey dot will appear on the top
left, and nothing will be recorded.
When camera is connected, press record, a red dot will appear on the top left,
and video is recorded.
Playback
Folder will be automatically increased as record les increase, one folder will
contain max. 997 video les, automatically create new folder when one folder is
full. The greater the le number, the newer the le, when SD card is full, will start
overwrite from the oldest le.
• Press ‘+’ or ‘- ‘button on monitor or VOL +/- on remote control to switch option.
• Press button on monitor or ‘OK’ on remote control to start playback.
Camera: show the channel that record le belongs to
Name: le name
Create: date and time that the le created
Group Num: group num increases every time start new record, les with same
group num are from the same record, eg: 4 channels recorded in quad view at the
same time, the four video les for each channel will have the same group num.
When playback le is recorded under split view, a window will appear to select
playback in multiple channel view or single channel view.