Product Support: Eccotemp.com/help-desk Shop Online: Eccotemp.com/products Store Locator: Eccotemp.com/locator
Phone: 866-356-1992 | Email: Support@eccotemp.com | Address: 315 - A Industrial RD Summerville, SC 29483
Installation of Remote Control
1. Remove the front cover of the Remote Control. (See illustration below)
2. At installation site, mark and screw two holes with 0.24” with 1.2” depth. Insert 2 rubber screws into
the holes. Place the remote control against the wall, align the holes of control with the holes in the
wall, and fasten them with wood thread screws. (See illustration below)
3. Replace the front cover on the remote control.
To Next Page
Loading...
