To Next PageTo Next Page
Need help?Do you have a question about the Eccotemp L-10 and is the answer not in the manual?
General| Brand | Eccotemp |
|---|---|
| Model | L-10 |
| Category | Water Heater |
| Language | English |
Ignition circuit opens with water pressure between 20-80 PSI for convenient operation.
Shuts off gas supply immediately on flameout or after 20 minutes of continuous use.
Features an Energy Factor (EF) of 85% for efficient operation.
Prevents water pipe and regulator damage from freezing water.
Shuts off gas supply if water flow through the unit stops.
Covers unattended operation, high winds, and outdoor use guidelines.
Addresses gas leak detection and proper gas regulator connection.
Alerts users that the exhaust gas and top of the unit become HOT.
Distinguishes between NG and LP models and their safe operation.
Diagnoses common reasons for the unit failing to ignite or operate.
Addresses scenarios where the unit ignites but then stops.
Troubleshoots issues related to insufficient hot water temperature.
Resolves problems where water flows but is not heated.
Helps identify why the unit fails to power on or respond.
Details the unit's construction and identifies key components.
Inspect the unit packaging for any shipping damage.
Ensure all necessary components are included with the unit.
Properly attach the rain cap to the flue vent for protection.
Attach the garden hose adapter to the water input fitting.
Connect the gas regulator and hose to the unit.
Guides on adjusting water temperature using regulator knobs.
Instructions for correctly installing the 'D' cell batteries.
Details on how to suspend or permanently mount the water heater.
Procedure for attaching the gas regulator to the LP tank.
Essential checks before operating the unit, including water pressure and gas.
Guidance on setting the water and gas regulator knobs.
Steps for igniting the burner and adjusting water flow.
Instructions for draining the unit to prevent freezing damage.
