ECGMAC EM-1201 - User Manual

1
Copyright ©2014 Shenzhen ECGMAC Medical Electronics Co., Ltd. All rights reserved.
Statement
Shenzhen ECGMAC Medical Electronics Co., Ltd (hereinafter called ECGMAC) assumes no
responsibility for any injury, or for any improper or illegal use of the product, that results from
failing to comply with this manual, ECGMAC assumes no consequence caused by the publication.
Any part of the manual shall not be reproduced, photocopied in any form without prior written
permission from ECGMAC.ECGMAC reserves the right to change, update, revise the product
design, specification or function at any time without notice.
Responsibility of the Manufacturer
ECGMAC only considers itself responsible for any effects on safety, reliability and performance of
the equipment if:
Assembly operations, extensions, re-adjustments, modifications or repairs are carried out by
personnel authorized by ECGMAC, and the electrical installation of the relevant room complies
with safety standards.

Summary

Safety Guidance

Installation and Storage

Before Operation

Pre-operation checks to ensure safety and functionality.

During Operation

Safety precautions to follow while the device is in use.

After Operation

EMC and Relevant Notes

Electromagnetic compatibility guidelines and potential interferences.

Safety Information

Safety Warning

Critical warnings for safe operation and to prevent harm.

Warnings for Rechargeable Lithium Battery

Specific safety warnings related to the lithium battery.

General Notes

Cleaning, Disinfection and Maintenance

Procedures for cleaning, disinfecting, and maintaining the device.

Contraindication

Conditions under which the ECG machine should not be used.

Structure and Principle

Electrodes Connection

Detailed instructions for connecting electrodes to the patient.

Patient Cable Connection

How to connect the patient cable to the ECG machine.

Power Connection

Instructions for connecting the device to power sources.

Principle and Schematic Diagram

Operation Preparations

Environmental Operating Conditions

Inspection before Operation

Checks to perform before starting an ECG recording.

Lead off Indication

How the device indicates a disconnected ECG lead.

Battery Installation

Loading Recording Paper

Operation Instructions

Startup with the Mains Supply

Procedure for starting the ECG machine using AC power.

Shutdown with the Mains Supply

Startup and Shutdown with the Battery

How to start and stop the device using its internal battery.

Battery Charge

The ECG Main Interface

Overview of the primary display screen and its elements.

Operation Mode

Explanation of different operating modes like Manual, AUTO, and Rhythm.

Leads Setup

How to configure the ECG leads for recording.

Display Setup

System Setting

Accessing and configuring various system parameters.

Auto analysis setup

Filter setup

Lead selection setup

Cleaning, Disinfection and Maintenance

Cleaning

Disinfection

Care and Maintenance

General care and maintenance procedures for the device.

Common Troubleshooting and Solution

Some Lead without Waveform Printout

Buttons on the Control Panel not Working

AC Interference

EMG Interference

Baseline Drift

Warranty and After-sale Service

Appendix C Specification

ECGMAC EM-1201 Specifications

General

Category	Electrocardiograph
Channels	12
Power Supply	AC 100-240V, 50/60Hz
Storage Temperature	-20°C to 55°C
Display	LCD
Recorder	Thermal printer
Operating Temperature	5°C to 40°C
Humidity	25% to 95% non-condensing