ECGMAC EM-1201 - Page 29

29
Identifier Name Description
A Operation Mode Select Rhythm, AUTO and Manual mode from the keyboard
B Baseline Drift Filter Select it in the filter setup interface, refer to Chapter 5.9.7
C EMG filter Select it in the filter setup interface, refer to Chapter 5.9.7
D Time and date Set it in the time and date setup interface, refer to Chapter 5.9
E Power supply mode Indicate the current power supply mode, AC or battery
F Heart rate Current Heart rate value
G Name Patient name: no more than 20 characters
H ID Patient ID: no more than 10 digits
I
Leads and waveform
display
Display the waveforms
F1 Patient
Press【F1】, patient information input
F2 Paper speed setup
Press【F2】, choose paper speed within 5mm/s, 6.25mm/s,
10mm/s, 12.5mm/s,25mm/s,50 mm/s
F3 Sensitivity setup
Press 【 F3 】 , choose sensitivity within 2.5mm/mV. 5mm/
mV,10mm/ mV,20mm/mV
F4 Freeze
Press【F4】, save current patient test waveforms
F5 Lead
Press 【F5】 to see electrodes placement indication
F6 Setup
Press【F6】to enter system setup interface, refer to chapter 5.9
F7 More
Press【F7】,enter the second page of the main interface
Replay
Press【F4】to Freeze the waveform displayed on the main interface.