EasyManua.ls Logo

ECGMAC EM-1203 - Page 61

ECGMAC EM-1203
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
61
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
EMC guidance and manufacturer’s declarations - Electromagnetic emissions - For all the equipments and systems
EMC guidance and manufacturer’s declarations –Electromagnetic immunity
EM-1201/1202/1203 ECG Machine are intended for use in the electromagnetic environment specified
below. The customer or the user of EM-1201/1202/1203 ECG Machine should assure that it is used in
such an environment.
Immunity test
IEC 60601
test level
Compliance level Electromagnetic
environment -
guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood,
concrete, or ceramic tile. If
floors are covered with
synthetic material, the
relative humidity should be
at least 30%.
Electrical fast
transient/ burst
IEC 61000-4-4
±2 kV for power supply
Lines
±1 kV for input/output
lines
±2 kV for power
supply lines
±1 kV for input/output
lines
Mains power quality
should be that of a typical
commercial or hospital
environment.
Surge
IEC 61000-4-5
±1 kV differential mode
±2 kV common mode
±1 kV differential
mode
±2 kV common mode
Mains power quality
should be that of a typical
commercial or hospital
environment.
Power frequency
50/60HZ
IEC61000-4-8
3A/m 3A/m Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.
Voltage dips, short
interruptions, and
voltage variations
on power supply
input lines.
IEC 61000-4-11
5%U
T
(>95% dip in U
T
)
for 0.5 cycle
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
5%U
T
(>95% dip in U
T
)
5%U
T
(>95% dip in U
T
)
for 0.5 cycle
40% U
T
(60% dip in U
T
)
for 5 cycles
70% U
T
(30% dip in U
T
)
for 25 cycles
5%U
T
(>95% dip in U
T
)
Mains power quality
should be that of a typical
commercial or hospital
environment. If the user of
EM-1201/1202/1203 ECG
Machine Equipment
requires continued
operation during power
mains interruptions, it is
recommended that
EM-1201/1202/1203 ECG
Machine be powered from
an uninterruptible power
supply or battery.

Table of Contents

Related product manuals