17
17
silicone lubrication steps & information
Insert the plastic tube into the silicone bottle.
1. After placing the running belt to the side, lift the belt lightly
and put the rubber tube under the running belt completely.
2. From the left side, start adding silicone from center
until you see the mark line, then stop.
3. Repeat on the right side.
4. Start treadmill and walk on treadmill for 3-5minutes at 2-3 mph.
Adding silicone is suggested once every six months.
belt maintenance
.4 in
5 in 5 in
To Next Page
Loading...
