What to do if my Echelon STRIDE-s has over-current protection issues?
- BBrenda MitchellJul 29, 2025
If your Echelon Treadmill is experiencing over-current protection issues, check the following: * Ensure that no parts of the motor are stuck. Unplug the power cable, adjust the motor, plug the power cable back in, and restart the treadmill. * Check for a burning smell coming from the motor; if present, replace the motor. * Inspect the lower control board for a burning smell; if detected, replace the lower control board. * Verify that the power outlet provides adequate voltage. If the voltage is low, use a different power outlet.