CS-350WES
19
IGNITION SYSTEM
2. Remove cushion cap and loosen cushion rubber
bolt.
3. Disconnect spark plug cap (C) from spark plug.
Pass high tension lead through the space between
engine cover (D) and rear handle (E).
4. Remove ignition coil (F).
A
B
C
(continued)
3-8 Replacing spark plug cap and coil
1. Disconnect spark plug cap (A) from spark plug.
2. Apply some oil in the cap (A) to aid in removing
the cap from lead (B).
3-7 Removing ignition coil
1. Disconnect switch lead from lead terminal of
ignition coil. Loosen ignition coil bolts.
F
D
E
To Next Page
Loading...
