To Next PageTo Next PageWhat to do if Echo CS-350WES has no fuel at carburettor?
If there is no fuel at the carburetor of your Echo Chainsaw, the fuel filter or fuel line could be clogged, requiring cleaning or replacement. If these steps don't solve the problem, it may be a carburetor issue, and you should consult your ECHO dealer.
Why does my Echo Chainsaw engine run, but dies or accelerates poorly?
If your Echo Chainsaw engine runs, but dies or accelerates poorly, it might be due to several reasons. The air filter, fuel filter, or fuel vent could be dirty or plugged, requiring cleaning or replacement. The spark plug might need cleaning, adjustment, or replacement. Adjusting the carburetor might also solve the problem. Additionally, check if the cooling system or exhaust port/silencer is plugged and clean them if necessary.
What to do if Echo CS-350WES Chainsaw has no spark at plug?
If there's no spark at the spark plug in your Echo Chainsaw, it could be due to several reasons. The spark gap might be incorrect and needs adjustment to 0.6 to 0.7 mm. The plug might be covered with carbon or fouled with fuel, requiring cleaning or replacement. Alternatively, the spark plug itself may be defective and needs replacement.
Why is the silencer wet with fuel on my Echo CS-350WES Chainsaw?
If the silencer of your Echo Chainsaw is wet with fuel, it indicates that the fuel mixture is too rich. Try opening the choke. Another solution is to clean or replace the air filter. You may also need to adjust the carburetor or consult your ECHO dealer.
General| Power Output | 1.3 kW |
|---|---|
| Chain Pitch | 3/8 in |
| Chain Gauge | 0.050 in |
| Ignition System | Electronic |
| Vibration Damping | Yes |
| Engine Displacement | 34.0 cc |
Identifies safety and operational symbols on the machine.
Outlines essential safety guidelines for using the chainsaw.
Details required safety gear for the operator.
Information on fuel mixture and chain oil.
Covers starting the engine from cold or warm.
Instructions for running and stopping the chainsaw.
Guides on safe cutting, felling, limbing, and bucking.
How to verify the chain brake is working.
How to disengage the chain brake.
Schedule for routine maintenance tasks.
Diagnosing and fixing common problems.
Adjustment and tuning of the carburetor.
Maintenance of the air filter.
Maintenance of fuel and oil filters.
Maintenance and care of the guide bar and sprocket.
Maintenance of the oiler and spark plug.
General chain maintenance and sharpening instructions.
Procedures for storing the chainsaw, including long-term.
Technical data and specifications of the chainsaw.
Compliance statement for the European market.
