CS-350WES
40
SAW CHAIN LUBRICATION SYSTEM
6-1 Checking oil cap and strainer
1. Remove oil cap.
2. Check oil cap for cracks and O-ring (A) for cuts
or damage. Replace defective parts as required.
3. Pull oil strainer from oil tank using a wire hook.
4. Clean oil strainer in a suitable solvent, or replace
with a new one if damaged.
6 SAW CHAIN LUBRICATION SYSTEM
(G)
(E)
(H)
(C)
(A)
(F)
(B)
(D)
(A)
(J)
( A ) Oil outlet pipe
( B ) Auto-oiler assembly
( C ) Worm gear
( D ) Oil intake pipe
( E ) Oil filter (Strainer)
( F ) Engine cover (Oil tank)
( G ) Oil cap
( H ) Oil tank check valve
( J ) O-ring
To Next Page
Loading...
