SAFETY DCS-2500T
18 X7508220200
© 10/21 ECHO Incorporated
• Make sure that the area in which you are cutting is free from obstructions.
Do not let the bar nose contact a log, branch, or any other obstruction
which could be hit while you are operating the saw.
• Cutting at high speeds may reduce the likelihood of kickback. But cutting
at part-throttle or low speeds may be preferable to control the chainsaw in
tight situations and may also reduce the likelihood of kickback.
General Precautions
Operator’s Manual
Be careful to read the operator's manual properly before
using your product in order to ensure correct operation.
Failure to do so could lead to an accident or serious injury.
Do not use the product for anything other than its intended
purpose.
You must not use the product for any purpose other than those described
in the operator’s manual. To do so could lead to an accident or serious
injury.
Do not modify the product
You must not modify the product. To do so could lead to an accident or
serious injury. Any malfunction resulting from a modification to the product
will not be covered by the manufacturer's warranty.
Do not use the product unless it has been checked and
maintained
You must not use the product unless it has been checked and maintained.
Always ensure that the product is checked and maintained on a regular
basis. Failure to do so could lead to an accident or serious injury.
Loaning or assigning your product
• When loaning your product to another party, ensure that the person
borrowing the product receives the operator's manual along with it.
• If you assign your product to another party, please enclose the operator's
manual with the product when handing it over. Failure to do so could lead
to an accident or serious injury.
To Next Page
Loading...
Need help?
General
