Echo DCS-2500T User Manual

DCS-2500T MAINTENANCE
X7508220200 55
© 10/21 ECHO Incorporated
4. Do not turn the adjusting screw beyond the maximum or minimum limit
of volume adjustment.
Cooling System
1. Check periodically.
2. Remove debris blocking
air inlet (G) and outlet
(H).
Clean the unit with the air filter attached to it in order to prevent trash
from entering inside.
Air Filter
1. Remove battery.
2. Remove air filter (I).
3. Clean air filter area with
compressed air.
4. Brush debris from filter.
If filter is excessively
dirty or no longer fits
properly, replace it.
5. Dry filter completely.
6. Reinstall filter.
Replacement Guide Bar and Chain
Only use replacement bars and chains specified by the manufacture
or the equivalent. Otherwise, there may be a risk of accidents and
damage to the machine.
C
G
H
I

Echo DCS-2500T Specifications

General

Brand	Echo
Model	DCS-2500T
Category	Chainsaw
Language	English