Echo DCS-2500T User Manual

MAINTENANCE DCS-2500T
54 X7508220200
© 10/21 ECHO Incorporated
1. Clean before using. Use
a small screwdriver or
wire to clean the guide
bar groove (B). Clean
oil holes (C) with a wire.
2. Reverse the bar
periodically.
3. Check sprocket (D) and
clean the bar mount
area before installation
of the guide bar.
Replace either if worn.
Sprocket
1. A damaged sprocket
can cause premature
damage or wear to saw
chain.
2. Check sprocket when
you install new chain.
Replace if worn 0.5 mm
or more.
3. Check brake drum (E).
If it will not rotate by
hand, see your
authorized dealer for
repair.
Automatic Oiler
1. The discharge volume
of the automatic oiler is
adjusted to 7 mL/min
approximately at 7000 r/
min, prior to shipment
from factory.
2. To increase the delivery
volume, turn the
adjusting screw (F)
counterclockwise.
3. When adjusting screw touches stops, it has reached maximum
discharge volume. (13 mL/min at 7000 r/min).
B
C
D
E
F

Echo DCS-2500T Specifications

General

Brand	Echo
Model	DCS-2500T
Category	Chainsaw
Language	English