20
CAUTION
If engine has been running, the mufer and the spark arrester will be
very hot. Allow the mufer to cool before cleaning the spark arrester.
SPARK ARRESTER
The spark arrester must be cleaned regularly to keep it functioning as
designed.
A clogged spark arrester:
• Prevents the ow of exhaust gas
• Reduces engine output
• Increases fuel consumption
• Makes starting difcult
HOW TO REMOVE THE SPARK ARRESTER
1. Remove the ange bolts from the mufer cover and remove the
mufer cover.
2. Remove the special screw from the spark arrester and remove the
spark arrester from the mufer.
CLEAN THE SPARK ARRESTER SCREEN
1. Use a brush to remove carbon deposits from the spark arrester
screen.
Be careful to avoid damaging the screen.
2. The spark arrester must be free of breaks and holes. Replace the
spark arrester if it is damaged.
3. Install the spark arrester, and mufer protector in the reverse order
of disassembly.
If you have any problems with the operation of your generator, please
call customer service at 1-800-432-3246. If calling for assistance,
please have the model and serial number available.
OPERATION
To Next Page
Loading...
Need help?
General
