33
• Valves affecting distribution of ow.
• Distribution manifold.
6. Catalyst or Thermal Reactor System
• Catalytic converter.
• Thermal reactor.
• Exhaust manifold.
7. Particulate Controls
• Traps, lters, precipitators, and any other device used to capture
particulate emissions.
8. Miscellaneous Items Used in Above Systems
• Electronic controls.
• Vacuum, temperature, and time sensitive valves and switches.
• Hoses, belts, connectors, and assemblies.
E - Emission Warranty Parts List for Evap
1. Fuel Tank
2. Fuel Cap
3. Fuel Lines (for liquid fuel and fuel vapors)
4. Fuel Line Fittings
5. Clamps*
6. Pressure Relief Valves*
7. Control Valves*
8. Control Solenoids*
9. Electronic Controls*
10. Vacuum Control Diaphragms*
11. Control Cables*
12. Control Linkages*
13. Purge Valves*
14. Gaskets*
15. Liquid/Vapor Separator
16. Carbon Canister
17. Canister Mounting Brackets
18. Carburetor Purge Port Connector
*Note: As they relate to the evaporative emission control system.
Rato will furnish with each new small off-road engine/equipment written
instructions for the maintenance and use of the engine/equipment by the
owner.
CARB AND EPA WARRANTY
To Next Page
Loading...
Need help?
General
