Echo GT-225 - Service Data Manual

GT-225, SRM-225
10-21S-01
1
1
INTRODUCTION
We are constantly working on technical im-
provement of our products. For this reason,
technical data, equipment and design are
subject to change without notice. All speci-
fications and directions in this SERVICE
DATA are based on the latest products infor-
mation available at the time of publication.
ECHO SERVICE MANUAL Ord. 402-35
(Model : GT-225, SRM-225) contains lots
of information for servicing this model.
NOTE : Corrected tightening torque of
muf er cover on page 4.
 

    

   
   
   
CONTENTS
page
1 SERVICE INFORMATION .................... .......... 2
1-1 Speci cation ................................................... 2
1-2 Technical data ................................................ 3
1-3 Torque limits................................................ 4
1-4 Special repairing materials ......................... 4
1-5 Service limits............................................... 5
1-6 Special tools ............................................... 6
2 CARBURETOR ADJUSTMENT PROCEDURE ......7
2-1 General adjusting rules . .............................. 7
2-2 Presetting Idle adjust screw, Idle mixture
needle and Hi speed mixture needle ..................... 7
2-3 Adjusting carburetor.................................... 8
Reference No.
10-21S-01
REVISED: 201304
ISSUED: 200810