Echo GT-225L

44 pages

To Next Page

To Next Page

Loading...

X7732272601

© 3/2019 ECHO Inc.

Operator’s

Manual

GT-225L

GRASS

TRIMMER

The engine exhaust from this product contains chemicals known

to the State of California to cause cancer, birth defects, or other

reproductive harm.

Read and understand all provided literature before use.

Failure to do so could result in serious injury.

Questions and Answers:

Z
zeatonAug 5, 2025
Why is my Echo GT-225L engine hard to start?
- M
  Monique BrownAug 5, 2025
  A hard-starting Echo Trimmer engine could be due to several reasons: * Obstructed fuel strainer or fuel line: Clean or replace. * Carburetor issues: Consult your dealer. * Fuel mixture too rich: Open the choke, clean or replace the air filter, adjust the carburetor or consult your dealer. * Stop switch OFF or electrical problem: Turn the switch ON or consult your dealer. * Incorrect spark plug gap, carbon buildup, fuel fouling, or a defective plug: Adjust the gap to 0.65mm (0.026 in.) or clean/replace the plug.
L
Linda GarciaAug 11, 2025
Why does my Echo GT-225L crank but not start?
- B
  bakerannaAug 11, 2025
  If your Echo Trimmer cranks but has trouble starting or doesn't start at all, several factors could be responsible. The fuel strainer or fuel line might be clogged, so clean or replace them. The fuel mixture might be too rich; in that case, open the choke, clean or replace the air filter, and adjust the carburetor. Also, check the spark plug gap and condition. Adjust the gap to 0.65mm (0.026 in.), and clean or replace the plug if it's covered with carbon or fouled with fuel. If there is no spark, turn the switch to the ON position.
Y
Yvonne HunterAug 17, 2025
What to do if my Echo GT-225L Trimmer engine starts hard or not at all?
- J
  Julie BruceAug 18, 2025
  If your Echo Trimmer engine is hard to start or won't start, possible causes include a fuel strainer or fuel line obstruction (clean or replace), a carburetor issue (consult your dealer), a fuel mixture that's too rich (open choke, clean or replace air filter, adjust carburetor, or see your dealer), the stop switch being OFF or an electrical/inter-lock switch problem (turn switch to ON or see your dealer), or an incorrect spark plug gap, carbon buildup, fuel fouling, or a defective plug (adjust gap to 0.65mm (0.026 in.) or clean/replace the plug).
M
moniquepopeAug 23, 2025
How to fix an Echo GT-225L when the engine does not crank?
- R
  rcurryAug 23, 2025
  If the engine of your Echo Trimmer does not crank, it may be caused by an internal engine problem. In this case, it is best to contact your Echo dealer.
B
Brandi MoodyAug 29, 2025
What to do if my Echo Trimmer engine runs but dies?
- C
  Cody RichardsonAug 29, 2025
  If your Echo Trimmer engine starts but then dies or doesn't accelerate correctly, several issues could be the cause. A dirty air filter, fuel filter, or a plugged fuel vent could be restricting flow; try to clean or replace them. A dirty or worn spark plug can cause issues, so clean and adjust or replace it. Improper carburetor adjustment can also lead to this problem, so ensure it's correctly adjusted. Overheating can cause this, so clean the cooling system if it's dirty or plugged. Lastly, a plugged spark arrestor screen can cause the engine to die. Replace the spark arrestor screen to resolve this.

Echo GT-225L Specifications

General

Engine Type	2-stroke
Displacement	21.2 cc
Power Output	0.71 kW
Handle Type	Loop
Power Source	Gasoline
Shaft Type	Straight

Summary

Introduction

Servicing Information

Information regarding product service and support.

PartsSerial Number

Location and importance of model and serial numbers.

Safety

Understanding Safety Information

Explains safety alerts, symbols, and keywords.

Personal Safety Guidelines

Covers physical condition, protective gear, and injury prevention.

Safe Operating Practices

Details proper grip, stance, and avoiding hazards.

Emission Control

CARB And EPA Emissions Control Information

Details emissions standards and labels for compliance.

Description

Product Emission Durability

Explains the certified emission compliance time span.

Assembly

Shield Installation

Instructions for installing the debris shield assembly.

Operation

Support Handle Adjustment

Guidance on positioning and tightening the support handle.

Fueling and Fuel Handling

Information on fuel types, mixing, and safe handling procedures.

Engine Starting Procedures

Instructions for starting the engine when cold or warm.

Maintenance

Stopping the Engine

Procedures for safely shutting down the engine.

Maintenance Planning

Classification of tasks by skill level and frequency.

Air Filter Maintenance

Instructions for inspecting and cleaning the air filter.

Fuel Filter Replacement

Procedure for replacing the fuel filter.

Spark Plug & Cooling System Service

Covers spark plug inspection and cooling system maintenance.

Exhaust System Service

Maintenance for the spark arrestor screen and exhaust ports.

Exhaust Port Cleaning

Procedure for cleaning carbon deposits from exhaust ports.

Carburetor Adjustment

Information on adjusting the carburetor for optimal performance.

Lubrication Procedure

Steps for lubricating the drive shaft.

Nylon Line Replacement

Guide for replacing the trimmer line.

Storage

Long Term Storage

Guidelines for storing the unit for extended periods.

Related product manuals

Preview: Echo GT-225 - 10-09

Echo GT-225 - 10-09

Preview: GT-225 - PARTS CATALOG SERIAL NUMBER S09812001001 - S09812999999

GT-225 - PARTS CATALOG SERIAL NUMBER S09812001001 - S09812999999

Preview: Echo GT-22G

Preview: Echo GT-222ES

Preview: Echo GT-200R

Preview: Echo GT-251E

Preview: Echo GT-200R - 11-03

Echo GT-200R - 11-03

Preview: Echo GT-200R - 10-05

Echo GT-200R - 10-05

Preview: GT-200R - SERIAL NUMBER 07003101-07999999

GT-200R - SERIAL NUMBER 07003101-07999999

Preview: GT-200R - PARTS CATALOG SERIAL NUMBER 10001001- 10999999

GT-200R - PARTS CATALOG SERIAL NUMBER 10001001- 10999999