GT-225L OPERATION
X7732272601 17
© 3/2019 ECHO Inc.
Support Handle
Note: Label shows minimum
spacing for Support
Handle location.
Note: Support Handle is pre-
installed. Re-
positioning and
tightening is all that is required.
1. Position Support Handle (A) in
comfortable operating position
and tighten wing nut (B). The
cutting attachment should be 5
- 7.5 cm (2 - 3 in.) above the
ground and as level as
possible.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
To Next Page
Loading...
Need help?
General