Echo HC-150 - 03-04 - Specifications

HEDGE CLIPPER
OPERATOR'S MANUAL
9
SPECIFICATIONS
MODEL ------------------------------------------ HC-150
Length-------------------------------------------- 1,040 mm (41.0 in.)
Width--------------------------------------------- 240 mm (9.45 in.)
Height -------------------------------------------- 200 mm (7.87 in.)
Weight, dry-------------------------------------- 4.8 kg (10.7 lb.)
Type of Engine---------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine
Displacement ------------------------------------ 21.2 cc (1.29 cu.in.)
Bore ----------------------------------------------- 32.2 mm (1.27 in.)
Stroke--------------------------------------------- 26.0 mm (1.02 in.)
Exhaust System --------------------------------- Spark Arrestor Muffler
Carburetor --------------------------------------- Zama w/purge
Ignition System --------------------------------- Flywheel Magneto, Capacitor discharge ignition
Spark Plug --------------------------------------- BPMR-8Y (Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------- Mixed Fuel - gasoline and oil
Fuel/Oil Ratio------------------------------------ 50:1 two-stroke air cooled engine oil
Gasoline ------------------------------------------ 89 Octane unleaded. DO NOT use fuel containing methyl alcohol, more than
10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------- Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ----------------------------- 0.5 lit. (16.9 fl. oz)
Starter System ----------------------------------- Automatic Recoil Starter
Clutch -------------------------------------------- Centrifugal Type
Gear Case Ratio --------------------------------- 5.88:1
Cutter --------------------------------------------- Double Reciprocating Blade, Double Edge
Length ----------------------------------------- 490 mm (19.3 in.)
Pitch -------------------------------------------- 35 mm (1.38 in.)
Height ------------------------------------------ 21 mm (0.83 in.)
Maximum Diameter Cut
Soft Material ----------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------- 13 mm (1/2 in.)
Idle Speed (RPM) ------------------------------- 2,400 - 3,200
Wide Open Throttle (RPM)-------------------- 10,000 - 11,000
IMPORTANT
This spark ignition system complies with Canadian ICES-002