Echo HC-150 - SERIAL NUMBER 05001001-05999999 User Manual

24 pages

To Next Page

Hedge Clipper

Operator's Manual

MODEL HC-150

Serial Number 05001001 - 05999999

WARNING DANGER

Read rules for safe operation and all instructions carefully. ECHO provides this

Operator's Manual and a Safety Manual. Both must be read and understood for

proper and safe operation.

X7532240901

X753000701

10/03

Questions and Answers:

W
walkerjasonJul 26, 2025
What to do if my Echo Lawn and Garden Equipment engine cranks but won't start?
- T
  Thomas WoodsJul 26, 2025
  If your Echo Lawn and Garden Equipment engine cranks but struggles to start or doesn't start at all, several factors could be at play. It might be due to no fuel reaching the carburetor, in which case you should clean or replace it. Another potential reason is a wet muffler, indicating a need to open the choke, clean or replace the air filter, adjust the carburetor, or consult your Echo dealer. Also, check for spark issues by ensuring the switch is turned ON, and consider adjusting the spark plug to .65mm (0.026in.), cleaning or replacing it.
J
Jill ClarkAug 8, 2025
Why does my Echo Lawn and Garden Equipment engine run but then die or not accelerate right?
- K
  Karen MendozaAug 9, 2025
  If your Echo Lawn and Garden Equipment engine runs but dies or does not accelerate properly, there are several possible causes. A dirty air filter could be the culprit, so clean or replace it. Also, a dirty fuel filter can cause this issue, so replace it. A plugged fuel vent is another possibility, which requires cleaning or replacement. Additionally, check the spark plug; if it's dirty or worn, clean and adjust it or replace it. Improper carburetor adjustment can also lead to these symptoms, so adjust it accordingly. Lastly, ensure the cooling system is clean and not plugged, and check the spark arrestor screen for blockage, replacing it if necessary.

Echo HC-150 - SERIAL NUMBER 05001001-05999999 Specifications

General

Brand	Echo
Model	HC-150 - SERIAL NUMBER 05001001-05999999
Category	Lawn and Garden Equipment
Language	English

Summary

Introduction to ECHO Hedge Clipper

Operator's Manual Guide

Read and understand this manual for operation, starting, stopping, maintenance, storage, and assembly.

Safety Manual Overview

Read and understand this manual for hazards and safety measures.

Safety Symbols and Decals

Interpreting Safety Symbols

Explains symbols for warnings, dangers, and prohibitions.

Identifying Safety Decals

Locates and describes key safety decals on the hedge clipper.

International Symbols and Safety Instructions

Understanding International Symbols

Explains symbols related to operation, fuel, and hazards.

Personal Safety and Protective Gear

Covers physical condition, proper clothing, eye, hand, and hearing protection.

Hot Weather Safety

Advises on managing fatigue and heat stroke risk in hot weather.

Extended Operation and Equipment Safety

Vibration, Cold, and RSI Precautions

Discusses Raynaud's Phenomenon, RSI/CTS risks and precautions.

Using Approved Attachments and Unit Checks

Advises on using ECHO approved attachments and performing pre-operation checks.

Safe Operation Guidelines

General Operating Procedures

Covers ventilation, work area, grip, stance, and avoiding hot surfaces.

Blade Maintenance Warning

Warns against blade maintenance while the engine is running.

Emissions Control Information

EPA Phase 2 Compliance

Details emission control system (EM) and compliance period.

Product Description and Contents

Package Contents and Parts Identification

Lists package contents and identifies components with numbers.

Component Identification

Key Hedge Clipper Components

Describes major parts like handles, blades, choke, primer, etc.

Blade Cover and Safety Video

Describes blade cover use and availability of safety videos.

Technical Specifications

HC-150 Model Specifications

Lists detailed technical specifications like dimensions, weight, engine, fuel, etc.

Assembly Procedures

Installing the Blade Stiffener

Step-by-step guide for installing the blade stiffener.

Removing the Blade Stiffener

Step-by-step guide for removing the blade stiffener.

Pre-Operation Checks

Fuel Requirements and Mixing

Details gasoline, oil type, and fuel mixing instructions.

Safe Fuel Handling Practices

Provides warnings and precautions for mixing, storing, and handling fuel.

Operation Guide

Starting a Cold Engine

Step-by-step guide for starting a cold engine.

Using the Throttle Trigger

Explains how to use the throttle trigger for acceleration.

Engine Starting and Stopping

Starting a Warm Engine

Step-by-step guide for starting a warm engine.

Stopping the Engine Safely

Steps to safely stop the engine using the stop switch.

Hedge Trimming Techniques

Trimming and Obstruction Safety

Guides on how to trim hedges and warnings for obstructions.

Maintenance Overview

Maintenance Schedule and Skill Levels

Introduces maintenance, skill levels, and recommended services.

Maintenance Intervals

Recommended Dealer Maintenance

Recommended maintenance schedule for dealer services.

DIY Maintenance Schedule

Schedule for user-performed maintenance tasks.

Air Filter Maintenance

Cleaning and Replacing Air Filter

Step-by-step guide for cleaning or replacing the air filter.

Fuel Filter Maintenance

Inspecting and Replacing Fuel Filter

Steps to inspect and replace the fuel filter.

Spark Plug Service

Spark Plug Inspection and Gap Adjustment

Guide for checking, cleaning, and gapping the spark plug.

Cooling System Cleaning

Cleaning Engine Cooling Fins

Instructions for cleaning the engine's cooling system components.

Engine Cooling and Exhaust System

Cylinder Cover and Exhaust Port Service

Steps to remove cylinder cover, clean fins, and service exhaust port.

Spark Arrestor Screen Maintenance

Instructions for removing, cleaning, and replacing the spark arrestor screen.

Carburetor Adjustment

Idle Speed Adjustment Procedure

Guide for checking and adjusting the idle speed screw.

Lubrication Procedures

Blade and Gear Box Lubrication

Steps for cleaning and lubricating blades and greasing the gear box.

Blade Sharpening

Sharpening and Reinstalling Blades

Guide for sharpening blades and important notes on reinstallation.

Troubleshooting Common Problems

Engine Starting Issues

Troubleshooting guide for engine crank/start issues.

Engine Performance Problems

Troubleshooting guide for engine running, dying, or acceleration issues.

Engine Not Cranking Troubleshooting

Troubleshooting guide for when the engine does not crank at all.

Storage Instructions

Long Term Storage Preparation

Steps for preparing the unit for storage over 30 days.

Service and Support Information

Parts, Service Dealer, and Manuals

Information on obtaining parts, authorized service dealers, and manuals.

Consumer Support and Warranty Registration

Contact info for support, warranty registration, and additional resources.

Related product manuals

HC-150 HEDGE CLIPPER - PARTS CATALOG SERIAL NUMBER 05001001 - 05999999

26 pages

HC-150 HEDGE CLIPPER - PARTS CATALOG SERIAL NUMBER S76112001001 - S76112999999

42 pages

Echo HC-150 - 03-04 1