EasyManua.ls Logo

Echo HC-150 - SERIAL NUMBER 05001001-05999999 - Technical Specifications; HC-150 Model Specifications

Echo HC-150 - SERIAL NUMBER 05001001-05999999
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HEDGE CLIPPER
OPERATOR'S MANUAL
9
SPECIFICATIONS
MODEL ------------------------------------------ HC-150
Length-------------------------------------------- 1,040 mm (41.0 in.)
Width--------------------------------------------- 240 mm (9.45 in.)
Height -------------------------------------------- 200 mm (7.87 in.)
Weight, dry-------------------------------------- 4.8 kg (10.7 lb.)
Type of Engine---------------------------------- Air cooled, two-stroke, single cylinder, gasoline engine
Displacement ------------------------------------ 21.2 cc (1.29 cu.in.)
Bore ----------------------------------------------- 32.2 mm (1.27 in.)
Stroke--------------------------------------------- 26.0 mm (1.02 in.)
Exhaust System --------------------------------- Spark Arrestor Muffler
Carburetor --------------------------------------- Zama w/purge
Ignition System --------------------------------- Flywheel Magneto, Capacitor discharge ignition
Spark Plug --------------------------------------- BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------- Mixed Fuel - gasoline and oil
Fuel/Oil Ratio------------------------------------ 50:1 two-stroke air cooled engine oil
Gasoline ------------------------------------------ 89 Octane unleaded. DO NOT use fuel containing methyl alcohol, more than
10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------- Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ----------------------------- 0.5 lit. (16.9 fl. oz)
Starter System ----------------------------------- Automatic Recoil Starter
Clutch -------------------------------------------- Centrifugal Type
Gear Case Ratio --------------------------------- 5.88:1
Cutter --------------------------------------------- Double Reciprocating Blade, Double Edge
Length ----------------------------------------- 490 mm (19.3 in.)
Pitch -------------------------------------------- 35 mm (1.38 in.)
Height ------------------------------------------ 21 mm (0.83 in.)
Idle Speed (RPM) ------------------------------- 2,400 - 3,200
Wide Open Throttle (RPM)-------------------- 10,000 - 11,000

Related product manuals